foundry shakeout machine-Swing shakeout machine

The vibrating shakeout machine is suitable for large-scale shakeout of manual casting and mechanized molding casting tables in foundry workshops to separate the mold from the sand box, the sand mold from the casting, and the separated sand group is further broken. The bonded sand on the surface of the casting requires cleaning equipment Clean it up.
It consists of three parts: working quality, vibration isolation body and base. All adopt welded structure. The working mass is supported on the vibration isolation body by springs. The vibration isolation body is supported by springs on the base, and the ends of the vibration isolation body are symmetrically equipped with a pair of synchronous vibration motors. The composition direction of the vibration motor is perpendicular to the upper plane of the working mass, forming a dual-mass structure.

Operating principle of vibrating blanking machine

The vibration motors of symmetrical equipment run in reverse and synchronously, and the horizontal components balance each other. The resultant force in the vertical direction causes the vibration isolation body of the shakeout machine to vibrate sinusoidally at a certain acceleration, and the working mass vibrates sinusoidally at the same frequency. The mold is thrown up (with or without sand box), bumped, the sand mold is separated from the sand box, and the casting is separated from the sand mold. sandy crushing