sand temperature regulator,Sand Temperature Regulation System

The main principle of the sand temperature regulator is: sand enters the thermostat from the top and flows through the outside of the water pipe. The cooling water continuously passes through the multi-stage cooling water pipe equipped with radiators. The hot sand is cooled down by heat exchange with the cooling water through the cooling water pipe. , after the temperature controller reaches the specified temperature, the valve is opened, the sand is discharged, and the sand temperature adjustment is completed.

     The JHSWT series sand temperature regulator adopts the form of staggered heat dissipation pipes, with the sand twisting and descending slowly. Fully heat exchange, little wear on the radiator, and extended service life.

Counter-flow heat exchange is adopted, and the water flow pattern is bottom in and top out, which is opposite to the direction of sand flow.

Equipped with a temperature control system for fully automatic operation. When the sand discharge temperature is higher than the set temperature, the sand discharge gate is automatically closed and the water circulation system is started at the same time.

Equipped with a material level detection and control device to ensure that the heat exchanger is always buried in sand.